ZyXEL Communications P-660HN-T1A - Configuration for Wireless Station B

P-660HN Series Support Notes
89
All contents copyright © 2010 ZyXEL Communications Corporation.
Step 6: Fill in your network IP address and subnet mask and click OK to finish.
Configuration for Wireless Station B
To configure Ad hoc mode on your ZyAIR B-100/B-200/B-300 wireless NIC
card please follow the following step.
Step1: Double click on the utility icon in your windows task bar the utility will
pop up on your windows screen.
Step 2: Select configuration tab.