ZyXEL Communications P-660HN-T1A - Using Full Feature NAT

P-660HN Series Support Notes
52
All contents copyright © 2010 ZyXEL Communications Corporation.
5. Using Full Feature NAT
When P-660HN-T1A is in Routing mode, you can select NAT Option as
Full Feature in Network -> NAT -> General:
Key Settings:
Field
Options
Description
Network Address
Translation
Full Feature
When you select this option you can select
Address Mapping Set Number 1~8 in the
pull-down menu on the right.
SUA Only
When you select this option, this remote node
will use default SUA Address Mapping Set.
Configuring NAT
Address Mapping Sets and NAT Server Sets