ZyXEL Communications P-660HN-T1A - Page 95

P-660HN Series Support Notes
95
All contents copyright © 2010 ZyXEL Communications Corporation.
Step 2: Set up WEP Key in the Web Configurator. You need to set the one of
the following parameters:
o 64-bit WEP key (secret key) with 5 characters
o 64-bit WEP key (secret key) with 10 hexadecimal digits
o 128-bit WEP key (secret key) with 13 characters
o 128-bit WEP key (secret key) with 26 hexadecimal digits
o 256-bit WEP key (secret key) with 29 characters
o 256-bit WEP key (secret key) with 58 hexadecimal digits
There are two ways you can configure the WEP Key.
(1) You can put in a special WEP key in the „WEP Key‟ menu directly.