Chapter 1 Introducing the VMG
VMG4005-B50A/B60A User’s Guide
10
Figure 1 VMG’s Internet Access Application
DSL Bonding
DSL bonding allows the VMG to aggregate two DSL lines into a virtual connection. The VMG will have
higher bandwidth and faster transmission speed at longer distances. Note that the two DSL lines must
come from the same ISP, and they both need to support DSL bonding. Also, only DSL 1 supports
telephone service.
To set up your network for DSL bonding:
Example 1
1 Connect a two-line splitter to the VMG (DSL in the figure).
2 Connect two DSL lines to the two-line splitter.
3 Connect the two DSL lines to two separate telephone jacks (Wall).
Figure 2 VMG’s Internet Access Application: DSL Bonding (Example 1)
Line
Line
DSL
Tel
DSL
DSL 1
DSL 2
Wall
To Next Page
Loading...
