Chapter 7 ARP Table
VMG4005-B50A/B60A User’s Guide
33
7.2 ARP Table Settings
Use the ARP table to view the IPv4-to-MAC address mapping(s) for the LAN. The neighbor table shows
the IPv6-to-MAC address mapping(s) of each neighbor. To open this screen, click System Monitor > ARP
Table.
Figure 22 System Monitor > ARP Table
The following table describes the labels in this screen.
Table 11 System Monitor > ARP Table
LABEL DESCRIPTION
# This is the ARP table entry number.
IPv4/IPv6
Address
This is the learned IPv4 or IPv6 IP address of a device connected to a port.
MAC Address This is the MAC address of the device with the listed IP address.
Device This is the type of interface used by the device. You can click on the device type to go to its
configuration screen.
To Next Page
Loading...
