ZyXEL Communications VMG4005-B50A - Chapter 10 System; System Overview; System Settings

VMG4005-B50A/B60A User’s Guide
38
CHAPTER 10
System
10.1 System Overview
In the System screen, you can name your VMG (Host) and give it an associated domain name. Domain
is the name given to a network. It will be required to reach a network from an external point (like the
Internet). Knowing the domain name will allow you to reach a particular network, and knowing the host
name will allow you to reach a particular device. For this reason, accessing a device from another
device within a network may work with just the host name (without the use of the domain name).
10.2 System Settings
Click Maintenance > System to open the following screen. Assign a unique name to this device so it can
be easily recognized on your network. You can use up to 30 characters, including spaces.
Figure 25 Maintenance > System
The following table describes the labels in this screen.
Table 14 Maintenance > System
LABEL DESCRIPTION
Host Name Type a host name for your VMG. Enter a descriptive name of up to 16 alphanumeric characters,
not including spaces, underscores, and dashes.
Domain Name Type a Domain name for your host VMG.
Cancel Click Cancel to abandon this screen without saving.
Apply Click Apply to save your changes.