VMG4005-B50A/B60A User’s Guide
42
CHAPTER 12
Remote Management
12.1 Remote Management Overview
Use remote management to control what services you can use through which interface(s) in order to
manage the VMG.
12.1.1 What You Can Do in this Chapter
• Use the MGMT Services screen to allow various approaches to access the VMG remotely from a DSL
and/or LAN connection (Section 12.2 on page 42).
• Use the Trust Domain screen to enable users to permit access from local management services by
entering specific IP addresses (Section 12.3 on page 43).
Note: The VMG is managed using the Web Configurator.
12.2 MGMT Services
Use this screen to configure through which interface(s), each service can access the VMG. You can also
specify service port numbers computers must use to connect to the VMG. Click Maintenance > Remote
Management > MGMT Services to open the following screen.
Figure 28 Maintenance > Remote Management > MGMT Services
To Next Page
Loading...
