Chapter 2 The Web Configurator
VMG4005-B50A/B60A User’s Guide
15
Note: The default allowable times that you can enter the Password is 3. If you entered the
wrong password for the fourth time, by default the Web Configurator will lock itself for 5
minutes before you can try entering the correct Password again. You can change
these settings in Maintenance > User Account > Add New / Edit Account (see Section
11.2.1 on page 40).
6 The following screen may display when you log into the Web Configurator for the first time. Enter a new
password, retype it to confirm, and click Change password. If you prefer to use the default password,
click Skip.
Figure 7 Change Password Screen
7 The Connection Status page appears. See Chapter 4 on page 23 for details.
Figure 8 Connection Status
To Next Page
Loading...
