Chapter 7 Wireless
VMG4381-B10A User’s Guide
110
The following table describes the labels in this screen.
7.3.1 Edit More AP
This screen is not applicable to VMG4381. Use this screen to edit an SSID profile. Click the Edit icon
next to an SSID in the More AP screen. The following screen displays.
Figure 36 More AP: Edit
The following table describes the fields in this screen.
Table 21 Network Setting > Wireless > More AP
LABEL DESCRIPTION
# This is the index number of the entry.
Status This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is
active. A gray bulb signifies that this SSID is not active.
SSID An SSID profile is the set of parameters relating to one of the Device’s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the wireless
client utility.
Security This field indicates the security mode of the SSID profile.
Modify Click the Edit icon to configure the SSID profile.
Table 22 More AP: Edit
LABEL DESCRIPTION
Wireless Network Setup
Wireless You can Enable or Disable the wireless LAN in this field.
To Next Page
Loading...
