Chapter 7 Wireless
VMG4381-B10A User’s Guide
116
Figure 41 WDS: Scan
The following table describes the labels in this screen.
7.8 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See Section 7.10.2 on page 120 for detailed definitions of the terms listed in this screen.
Figure 42 Network Setting > Wireless > Others
Table 27 WDS: Scan
LABEL DESCRIPTION
Wireless Bridge Scan Setup
Refresh Click Refresh to update the table.
# This is the index number of the entry.
SSID This shows the SSID of the available wireless device within range.
BSSID This shows the MAC address of the available wireless device within range.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.