Chapter 4 Tutorials
VMG4381-B10A User’s Guide
38
Try to connect to a website to see if you have correctly set up your Internet connection. Be sure to
contact your service provider for any information you need to configure the WAN screens.
4.3 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the Device serves as an access point (AP), and the notebook is the
wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Device. Then he can set up a wireless
network using WPS (Section 4.3.2 on page 40) or manual configuration (Section 4.3.3 on page 43).
4.3.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
1 Click Network Setting > Wireless to open the General screen. Select More Secure as the
security level and WPA2
-PSK as the security mode. Configure the screen using the provided
parameters (see page 38). Click Apply.
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed
To Next Page
Loading...
