NWA5000 / WAC6000 Series User’s Guide
129
CHAPTER 12
System
12.1 Overview
Use the system screens to configure general NWA/WAC settings.
12.1.1 What You Can Do in this Chapter
•The Host Name screen (Section 12.2 on page 129) configures a unique name for the NWA/WAC
in your network.
•The Date/Time screen (Section 12.3 on page 130) configures the date and time for the NWA/
WAC.
•The WWW screens (Section 12.4 on page 133) configure settings for HTTP or HTTPS access to
the NWA/WAC.
•The SSH screen (Section 12.5 on page 144) configures SSH (Secure SHell) for securely
accessing the NWA/WAC’s command line interface.
•The Telnet screen (Section 12.6 on page 148) configures Telnet for accessing the NWA/WAC’s
command line interface.
•The FTP screen (Section 12.7 on page 148) specifies FTP server settings. You can upload and
download the NWA/WAC’s firmware and configuration files using FTP. Please also see Chapter 14
on page 167 for more information about firmware and configuration files.
•The SNMP screens (Section 12.8 on page 149) configure the device’s SNMP settings, including
profiles that define allowed SNMPv3 access.
12.2 Host Name
A host name is the unique name by which a device is known on a network. Click Configuration >
System > Host Name to open this screen.
Figure 73 Configuration > System > Host Name
To Next Page
Loading...
