Chapter 1 Introduction
NWA5000 / WAC6000 Series User’s Guide
22
1.6.2 WAC6103D-I
The LEDs will stay ON when the WAC6103D-I is ready. You can change this setting in the
Maintenance > LEDs > Suppression screen.
Management Green On The WAC AP is managed by a controller.
Slow Blinking (blink
for 3 times, Off for 3s)
The WAC AP is searching (discovery) for a controller.
Off The WAC AP is in standalone mode.
WLAN Green On The 2.4 GHz WLAN is active.
Blinking The 2.4 GHz WLAN is transmitting or receiving data.
Off The 2.4 GHz WLAN is not active.
WLAN Green On The 5 GHz WLAN is active.
Blinking The 5 GHz WLAN is transmitting or receiving data.
Off The 5 GHz WLAN is not active.
UPLINK Amber/
Green
On Amber - The port is operating as a 100-Mbps
connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
Blinking The WAC is sending/receiving data through the port.
Off The port is not connected.
LAN Amber/
Green
On Amber - The port is operating as a 100-Mbps
connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
Blinking The LAN port is sending/receiving data through the
port.
Off The LAN port is not connected.
Locator White Blinking The Locator is activated and will show the actual
location of the WAC between several devices in the
network.
Off The Locator function is off.
Table 6 WAC6500 Series LEDs (continued)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
