ZyXEL Communications WSQ60 - Enable or Disable Daisy Chain Network Topology

Chapter 8 Web Interface Tutorials – Multy Plus (WSQ60)
Multy WiFi System User’s Guide
195
3 Click Add service to create a port forwarding rule. Add a service name, a port number or a range of
ports to define the service to be forwarded, specify the transport layer protocol used for the service, and
the MAC address of a device on your local network that will receive the packets from the port(s).
8.15 Enable or Disable Daisy Chain Network Topology
You can “daisy chain” multiple Multy Devices together to create expansive WiFi coverage for your
home.
When daisy chaining is enabled, each Multy Device chooses its own way of connecting to the primary
Multy Device – either by connecting directly, or by going through another Multy Device with a strong
WiFi signal.
When Multy Devices are daisy-chained, they do not all need to be placed near the primary Multy
Device, which means you can extend your coverage.