Chapter 8 Port
XGS1210-12 / XGS1250-12 User’s Guide
43
The following table describes the labels in this screen.
Table 11 Port
LABEL DESCRIPTION
Storm Control
Broadcast Storm
Control
Enable traffic storm control on the Switch by specifying how many broadcast packets a port
receives per second.
Loop Detection /
Prevention
Select Loop Detection to allow the Switch to detect a loop on the port. The port becomes
active when the loop disappears.
Select Loop Prevention to allow the Switch to shut down a port automatically when it detects a
loop on the port. The port becomes active when the loop disappears.
Select Off to disable this feature.
Apply Click this button to save your changes to the Switch.
Port Setting
Port This identifies the Ethernet port on the Switch.
State Select Enable to enable the port or Disable to disable it.
Speed/Type Select the speed of the Ethernet connection on this port.
The choices for XGS1210-12 are:
• Auto for all ports
• 10 Mbps for ports 1 – 8
• 100 Mbps for ports 1 – 10
• 1000 Mbps for all ports
• 2.5 G for ports 9 – 10
• DAC for ports 11 – 12, when using the DAC (Direct Attach Copper) cable
• SFP 1000M for ports 11 – 12
• SFP+ 10G for ports 11 – 12
The choices for XGS1250-12 are:
• Auto for all ports
• 10 Mbps for ports 1 – 8
• 100 Mbps for ports 1 – 11
• 1000 Mbps for all ports
• 2.5 G for ports 9 – 11
• 5 G for ports 9 – 11
• 10 G for ports 9 – 11
• DAC for port 12, when using the DAC (Direct Attach Copper) cable
• SFP 1000M for port 12
• SFP+ 10G for port 12
Select Auto to have the Switch obtain the following speeds (XGS1210-12):
• ports 1 – 8 connection speed of up to 1000 Mbps
• ports 9 – 10 connection speed of up to 2.5 Gbps, and ports 11-12 connection speed of up
to 10 Gbps
Select Auto to have the Switch obtain the following speeds (XGS1250-12):
• ports 1 – 8 connection speed of up to 1000 Mbps
• ports 9 – 12 connection speed of up to 10 Gbps
To Next Page
Loading...
