Need help?Do you have a question about the ZyXEL Communications XGS-4528F and is the answer not in the manual?
Performance| non-blocking switching fabric | 144 Gbps |
|---|---|
| switching forwarding rate | 100 Mpps |
| MAC entries | 8K |
Traffic Management and QoS| rate limiting granularity | 64 kbps |
|---|---|
| priority queues per port | 8 |
| IP routing domains | 64 |
Physical Specifications| dimensions | 438 (W) x 310 (D) x 44.45 (H) mm |
|---|---|
| weight | 7 Kg |
| ports | 24 GbE dual-personality (RJ-45 or SFP slot) ports + 2 12G stacking ports + 1 uplink slot for 2 10G capacity |
Power Requirements| input voltage | 100-240 VAC, 50/60 Hz |
|---|---|
| max power rating | 80 Watts |
Environmental Specifications| operating temperature | 0ºC ~ 45ºC |
|---|---|
| storage temperature | -25ºC ~ 70ºC |
| operating humidity | 10% ~ 90% (non-condensing) |
Details the steps for installing and connecting the switch hardware.
Introduces the configuration and functions of the web-based management interface.
Provides a step-by-step guide for setting up the switch for an example network.
Explains how to configure system information, general setup, switch setup, IP setup, and port setup.
Covers configuration of 802.1Q tagged and port-based VLANs for network segmentation.
Details how to configure forwarding rules based on static MAC addresses.
Explains STP, RSTP, and MSTP for preventing network loops.
Describes how to configure authentication and accounting settings on the switch.
Uses IP source guard to filter unauthorized DHCP and ARP packets.
Shows how to configure static routes for IP traffic forwarding.
Shows how to configure the DHCP feature.
Explains how to configure maintenance screens for firmware and configuration files.
Describes how to control access to the switch.
Covers potential problems and possible remedies for switch operation.
To Next Page
