Need help?Do you have a question about the ZyXEL Communications XGS1250-12 and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | - |
| Quality of Service (QoS) support | Yes |
| Power connector | DC-in jack |
| SFP+ module slots quantity | 1 |
| Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
| Basic switching RJ-45 Ethernet ports quantity | 11 |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Ethernet LAN data rates | 10, 100, 1000, 2500, 10000 Mbit/s |
| Jumbo frames | 12000 |
| Forwarding rate | 71.42 Mpps |
| MAC address table | 16000 entries |
| DHCP features | DHCP client |
| Product color | Gray |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 104 mm |
|---|---|
| Width | 250 mm |
| Height | 27 mm |
| Weight | 783 g |
Introduces the switch models and their basic functionality.
Illustrates various network scenarios where the switch can be used.
Explains how to manage the switch using the Web Configurator.
Provides recommendations for secure and effective switch management practices.
Guides on how to install and connect the switch.
Important safety guidelines to observe before using the switch.
Summary of front and rear panels for each model.
Visual representation and description of the switch's front panel.
Visual representation and description of the switch's rear panel.
Explanation of LED indicators for switch status and troubleshooting.
Introduction to the Web Configurator's functions and interface.
Step-by-step guide to logging into the switch via the Web Configurator.
Details on the ZON Utility for network deployment and management.
Instructions on how to change the administrator login password.
Procedures for resetting the switch to factory defaults and preventing lockout.
Overview of the switch setup process.
Guide to changing the switch's IP address during initial setup.
Steps to change the default password during initial setup.
Introduction to using the switch's various features.
Step-by-step guide to creating VLANs on the switch.
Instructions on configuring Port VID for VLAN forwarding.
Describes screens for system status and port details.
Displays general device information and port statistics.
Information on loop detection, prevention, and broadcast storm control.
Configuration options for port state, speed, and flow control.
Explains IEEE 802.1Q tagged VLAN concepts and forwarding.
How to view and configure VLAN settings on the switch.
Introduction to logically aggregating physical links for higher bandwidth.
Configuration screen for static link aggregation.
Discusses port mirroring setup screens for traffic analysis.
How to select monitor ports and specify traffic flow for mirroring.
Introduces Quality of Service features for data flow prioritization.
Explains packet queuing and concepts of Port-Based and 802.1p QoS.
Details on configuring Port-Based QoS for traffic prioritization.
Explains IEEE 802.1p QoS configuration using priority tags.
Explains IGMP snooping for multicast traffic management.
Configuration options for enabling IGMP snooping.
Information on Energy Efficient Ethernet (EEE) and HTTPS.
Settings for administrator password, firmware, system reset, and IP address.
Steps to update the switch's firmware for bug fixes and security.
Solutions for power, connection, and LED-related issues.
Troubleshooting steps for IP address and password login problems.
Troubleshooting firmware upgrade failures and login screen issues.
Information needed when contacting customer support.
Contact details for Zyxel offices globally.
Legal and regulatory compliance information for the device.
Compliance statement and conditions for FCC rules in the USA.
Compliance information for the European Union.
Important safety precautions for using the device.
Energy consumption and eco-design requirements for the switch.
Guidelines for proper disposal and recycling of the product and battery.
Explanation of symbols used in the manual for safety and usage.
Terms and conditions of the product's limited warranty.
Information on registering the product for firmware updates and notices.
Identification of trademarks used in the publication.
Information on free software distributed under GPL and similar licenses.
To Next Page