Chapter 9 VLAN
XGS1210-12 / XGS1250-12 User’s Guide
47
Maximum
number of IEEE
802.1Q VLAN
This shows the maximum number of IEEE 802.1Q VLANs you can have on the Switch.
VLAN ID This is the ID number of the VLAN group.
Enter a number between 1 and 4094 as the VLAN ID.
01 – 12 This displays the ports that are participating in a VLAN. A tagged port is orange, an untagged
port is green and ports not participating in a VLAN are gray. Multiple ports in a VLAN can be
configured as tagged or untagged or not participating.
A port is a ‘tagged port’ when the interface is expecting frames containing VLAN tags. An
example of this is when two switches are connected, and pass tagged traffic.
Modify Click Modify to edit the VLAN settings.
Delete Click Delete to remove the VLAN group. You cannot delete the default VLAN.
Create New
VLAN
Click this button to configure a new IEEE 802.1Q VLAN for the Switch.
Table 12 VLAN (continued)
LABEL DESCRIPTION
To Next Page
Loading...
