XGS1210-12 / XGS1250-12 User’s Guide
58
IGMP Static
Router Port
Select a port (Port 1 – 12) to be used as an IGMP router port.
Select Auto to allow any port to be used as an IGMP router port upon receiving an IGMP query.
The Switch treats an IGMP query port as being connected to an IGMP multicast router (or
server). The Switch forwards IGMP join or leave packets to an IGMP router port.
Note: If link aggregation is enabled, the ports in a link aggregation group will not be
available in this field.
Apply Click Apply to save your changes to the Switch.
Table 18 IGMP Snooping (continued)
LABEL DESCRIPTION
To Next Page
Loading...
