Chapter 14 Management
XGS1210-12 / XGS1250-12 User’s Guide
64
The following screen will appear after you click the Firmware Upgrade button. You will not be able to
configure other settings during the firmware upgrade process to avoid system crashes on the Switch.
Figure 46 Firmware Upgrade Path
Type the path and file name of the firmware file you wish to upload to the Switch in the text box or click
Path to locate it. After you select the firmware file, click the Upgrade button to load the new firmware.
Figure 47 Firmware Upgrade Confirmation
Figure 48 Firmware Uploading
After a successful upload, the system will reboot, and you will need to log into the Switch again.
To Next Page
Loading...
