ZyXEL Communications XGS4700 Series - Create a Policy Routing Rule

Chapter 6 Tutorials
XGS4700-48F User’s Guide
95
3 Click Add to save the settings to the run-time memory.
6.6.2 Create a Policy Routing Rule
Follow the steps below to set up a policy routing profile first and then a rule to
forward traffic of classifier DSCP58 to gateway R2.
1 Click IP Application > Policy Routing.
2 Select Active and enter a descriptive name for this profile (“To_R2” for example).
Click Add to save the settings to the run-time memory.