Chapter 9 VLAN
XGS4700-48F User’s Guide
122
allow frames with VLAN group tags 1 and 2 (VLAN groups that are unknown to
those switches) to pass through their VLAN trunking port(s).
Figure 42 Port VLAN Trunking
9.4 Select the VLAN Type
Select a VLAN type in the Basic Setting > Switch Setup screen.
Figure 43 Switch Setup: Select VLAN Type
9.5 Static VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port
with the specified VID.
To Next Page
Loading...
