Chapter 6 Tutorials
XGS4700-48F User’s Guide
76
DHCP client A based on the system name, VLAN ID and port number in the DHCP
request. Client A connects to the Switch’s port 2 in VLAN 102.
Figure 33 Tutorial: DHCP Relay Scenario
6.2.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
1 Access the web configurator through the Switch’s management port.
2 Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
Apply to save the settings to the run-time memory.
VLAN 102
DHCP Server
Port 2
PVID=102
172.16.1.18
A
192.168.2.3
To Next Page
Loading...
