ZyXEL Communications XGS4700 Series - Configuring Switch B

Chapter 6 Tutorials
XGS4700-48F User’s Guide
83
5 Then select Yes to enable PPPoE IA in VLAN 1 and also select Circuit-id and
Remote-id to allow the Switch to add these two strings to frames tagged with
VLAN 1 and pass to the PPPoE server. Click Apply.
6.3.2 Configuring Switch B
The example uses another XGS4700-48F as switch B.
1 Click Advanced Application > PPPoE > Intermediate Agent. Select Active
then click Apply.
Click Port on the top of the screen.