ZyAIR B-3000 Intelligent Wireless LAN Access Point
22
Table 7 Roaming
LABEL DESCRIPTION
Port Enter the port number to communicate roaming information between access points.
The port number must be the same on all access points. The default is 16290. Make
sure this port is not used by other services.
6.5 Configuring IEEE802.1x Authentication
The IEEE 802.1x standard outlines enhanced security methods for both the authentication of wireless
stations and encryption key management. Authentication can be done using the local user database internal
to the ZyAIR (authenticate up to 32 users) or an external RADIUS server for an unlimited number of users.
To change your ZyAIR’s authentication settings, click ADVANCED, WIRELESS and then the 802.1x
tab. The screen appears as shown.
Figure 9 Wireless 802.1x Authentication
The following table describes the fields in this screen.
To Next Page
Loading...
