ZyAIR B-3000 Intelligent Wireless LAN Access Point
4
1 Introducing the ZyAIR
The ZyAIR B-3000 is an IEEE802.11b compliant 11 Mpbs wireless LAN access point. It is suited for
wireless connections to the wired network in the home and small office environment. The key features of
the ZyAIR are PoE (Power over Ethernet), wireless security, multiple ESS, bridge and VLAN. See your
User’s Guide for more details on all ZyAIR features.
2 Hardware Connections
2.1 Top Panel and Connections
LABEL DESCRIPTION
ETHERNET For initial configuration use an Ethernet cable to connect a computer (with an Ethernet
card) to ETHERNET port. The port is auto-negotiating (can connect at 10 or 100Mbps)
and auto-crossover (automatically adjusts to the type of Ethernet cable you use (straight-
through or crossover)).
RESET You only need to use this button if you’ve forgotten the ZyAIR’s password. It returns the
ZyAIR to the factory defaults (password is 1234 and LAN IP address 192.168.1.2). Refer
to the User’s Guide.
POWER
12VDC
Connect the end of the included power adaptor to this power socket. You only need to
connect the external power adaptor if you are not using PoE. If you simultaneously use
both PoE and the external power adaptor, the ZyAIR will draw power from the PoE
connection only.
Use only the included power adaptor.
To Next Page
Loading...
