ZyXEL Communications ZyWALL 2 Plus - Page 24

romreset R + B restore default romfile
server
access <telnet|ftp|web|icmp|snmp|dns>
<value>
R + B set server access type
load R + B load server information
disp R + B display server information
port <telnet|ftp|web|snmp> <port> R + B set server port
save R + B save server information
secureip <telnet|ftp|web|icmp|snmp|dns>
<ip>
R + B set server secure ip addr
certificate <https|ssh> [certificate name] R + B set server certificate
auth_client <https> [on|off] R + B specifies whether the server authenticates the
client
fwnotify R + B
load R + B load fwnotify entry from spt
save R + B save fwnotify entry to spt
url <url> R + B set fwnotify url
days <days> R + B set fwnotify days
active <flag> R + B turn on/off fwnotify flag
disp R + B display firmware notify information
check R + B check firmware notify event
debug <flag> R + B turn on/off firmware notify debug flag
cmgr R + B
trace R + B
disp <ch-name> R + B show the connection trace of this channel
clear <ch-name> R + B clear the connection trace of this channel
cnt <ch-name> R + B show channel connection related counter
socket R + B display system socket information
filter R + B
netbios R + B
disp R + B display netbios filter status
config <0:Between LAN and
WAN, 1: Between LAN and
DMZ, 2: Between WAN and
DMZ, 3:IPSec passthrough,
4:Trigger Dial> <on|off>
R + B
config netbios filter
roadrunner R
debug <level> R enable/disable roadrunner service
0: diable <default>
1: enable
display <iface name> R display roadrunner information
iface-name: enif0, wanif0
restart <iface name> R restart roadrunner
ddns R + B
debug <level> R + B enable/disable ddns service
display <iface name> R + B display ddns information
restart <iface name> R + B restart ddns
logout <iface name> R + B logout ddns
cpu R + B
display R + B display CPU utilization
upnp R
active [0:no/1:yes] R Activate or deactivate the saved upnp
settings
config [0:deny/1:permit] R Allow users to make configuration changes.
through UPnP
display R display upnp information
firewall [0:deny/1:pass] R
Allow UPnP to pass through Firewall.
load R save upnp information