11
Loading a Cassette Tape
1. Connect power and press the button to turn on unit .
2. Set to cassette mode, press the FUNCTION until “TAPE and tAP”
indicator show on display.
3. Insert your cassette tape into the CASSETTE SLOT. The side of cassette
that your wish to listen to or record onto should be facing towards you.
Playing a Cassette Tape
1. When cassette tape install for a few seconds the unit will be start playing.
2. Make sure the VOLUME knob is not correct position.
3. When removing or stop play the cassette tape, press in the EJECT /
button fully.
Skip Track
When cassette tape playing, press in the EJECT / button half to
fast forward though the tape.
NOTE: To avoid damage to the cassette mechanism and your tape, always
press the EJECT button between each operation.
Connecting Bluetooth to your Smartphone I Tablet
1. Connect power and press the button to turn on unit .
2. Set to Bluetooth mode, press the FUNCTION until “bt ” indicator show on
display and the “ ” indicator blink on display. .
1. On your smartphone / Tablet, turn on Bluetooth and enable device
scanning.
2. When 1byone BS012 shows on the Bluetooth scan, select it to connect it
to your device.
3. When both devices are successfully connected ( indicator light on),
you are ready to play music wirelessly from your device.
4. Press the PLAY / button of external Bluetooth device to start music
playback.
5. Press the / (NEXT / PREV) of external Bluetooth device to
switch between music tracks.
NOTE:
If problems arise, hold the button to reconnect again.
If necessary to connect other devise, hold the
button to reconnect.
If mobile call coming , the music will stop play until the coming call end.
LISTENING TO CASSETTE
LISTENING TO BLUETOOTH
To Next Page
Loading...
