External Power Supply
An external 12 V power supply is connected to terminal block X19. Use a 12 V ± 15 %
DC power source dimensioned to current intake of 2 A at least (Part No. 91341481E) to
ensure a reliable function of your device.
PoE Supply
2N IP Force
®
is compatible with the PoE 802.3af (Class 0–12.95 W) technology and
can be supplied directly from the LAN via compatible network elements. If your LAN
in incompatible, insert the PoE injector, Part No. 91378100E/US, between
and the nearest network element. 2N IP Force
®
Electric Lock Connection
2N IP Force
®
is equipped with an electrically isolated relay switch with NO and NC
contacts (terminal block X17, max. 30 V / 1 A AC/DC) and 9 up to 13 V DC depending
on power supply (PoE: 9 V; adaptor: power supply voltage minus 1 V), max 600 mA
switched output (terminal block X18), to which a standard electric lock or another
compatible electrical appliance can be connected.
Note
Devices with PCB version 555v3 and higher provides independent
control of 12 V switched output (terminal block X18) and relay switch
(terminal block X17). Devices with PCB version 555v2 have both outputs
switched simultaneously.
To Next Page
Loading...
