Key Value Description
Enabled 0 or 1
Activates (1) or deactivates (0)
the use of the gateway.
IPaddress
IP address in format
xxx.xxx.xxx.xxx
Remote GSM gateway IP
address. Set this connection for
ERM remote control.
IPport IP port number
Remote gateway
communication port
(default=23).
Username String
Username for gateway access
through the Telnet protocol
(default=2n).
Password String
Password for gateway access
through the Telnet protocol
(default=2n).
Inc_table inc001 to inc100
Name of the table that includes
record for incoming GSM call
filtering. One table may be
shared by multiple GSM
gateways.
Inc_table_enabled True or False
Enables (True) or disables
(False) filtering of incoming
calls.
Other_CLIP 0 or 1
Determines whether an
identified GSM CLIP shall be
rejected (0) or received (1).
Out_table out001 to out100
Name of the table used for
outgoing call routing. One table
may be shared by multiple
GSM gateways.
Out_CLIP_table clip001 to clip100
Name of the table used for
outgoing call routing. One table
may be shared by multiple
GSM gateways.
Out_table
_enabled
True or False
Enables (True) or disables
(False) the use of the
Out_table.
Log 0 or 1
Activates (1) or deactivates (0)
LOG generation.
Debug 0 or 1
Activates (1) or deactivates (0)
debug generation.
Release_CAU Number 1-255
ISDN releases CAU which is
sent if a call is rejected
(default=21).
Phonebook table phonebook001-phonebook100
Name of the telephone
directory table (for the 2N
®
system only).NetStar
To Next Page
Loading...
