5.5 CDR Line Description
For the current CDRs see the Gateway / Gateway control – CDR file section or use the
AT&C / AT&CR AT commands for Telnet sessions.
**Date Time Type Cause From/to Groups conn. durat. aoc-info gid CDN CGN
IMSI/SCID
: **Column 1
:Column 2 date/time of call start
Column 3: type of call
O-OK – successful outgoing call
O-FD – unsuccessful outgoing call
I-OK – successful incoming call
I-FD – unsuccessful incoming call
OSIM – successful outgoing simulated call
RSIM – successful incoming simulated call
ESIM – unconnected outgoing simulated call
Column 4: GSM release cause
:Column 5 number of used channel/number of used GSM module
:Column 6 used GSM group (C= CallBack to PRI 1 , E= call via PRI 2 interface)
:Column 7 call setup time
Column 8: call duration in mmm:ss (max 255:59) or error cause for
unconnected calls
Column 9: call cost (will be implemented in a higher firmware version)
Column 10 : gateway id (optional)
Column 11: called number
:Column 12 calling number
Column 13: slot number/IMSI* of used SIM card
To Next Page
Loading...
