5.6 SDR Line Description
Refer to the file section for the current SDRs orGateway / Gateway control / SDR
use the AT&CS / AT&CSR AT commands for Telnet sessions.
** date time type error usr/gr/mo ssec date time pn/pt gid
: ** 1Column
:Column 2 date/time – sdr record creation time
:Column 3 type of SMS
R-OK – delivered OK – SMS received
S-FD – sending ERROR – SMS sending error
S-OK – send OK – SMS was sent but no SMS delivery receipt was required
S-TO – sending timeout – SMS was not sent within the set timeout
D-ER – delivery ERROR – SMS delivery error
D-OK – delivered OK – SMS delivered
D-TO – delivery timeout – SMS was not delivered within the set timeout
SANS – SMS after successful call
SNOS – SMS at no answer
SWEB – SMS was sent via web interface
SISD – ISDN alert SMS
SALV – alive SMS
SSIM – simulation SMS was sent via 2N SIMStar server
®
RSIM – simulation SMS was received 2N SIMStar server
®
: error typeColumn 4
for (D-OK): SMS receipt status (typically E – 000)
for (D-ER): SMS receipt error code
for (S-FD): module +CMS ERROR (typically E – 028)
for (S-FD): internal error (E – 902 = no rule to send)
:Column 4 user id/SMS group/GSM module
:Column 5 SMS sending time
:Column 6 date/time
First row – SMS sending time or total sending time for all parts of a long
SMS
Second row – time of SMS adding to the outgoing/incoming SMS database
:Column 8 part number/total
:Column 9 gateway id
To Next Page
Loading...
