GSM module, use G##, where ## is number of GSM module.
Tariff – use this parameter to specify the Tariff number.
Time from – set the beginning value of the time interval (hh:mm) for the
selected rule.
Time to – set the end value of the time interval (hh:mm) for the selected rule.
Day – define a day in the week on which the rule shall be applied (1= Monday,
…, 7 = Sunday).
Clip table structure:
Prefix Company
Change
prefix
Delete
last
Out
group
Time
from
Time
to
Day
605205697% 1 0 129 00:00 12:00 1234567
605205697#% 4 1 9 12:00 24:00 1234567
605% 1 #31# 0 129 00:00 24:00 1234567
605% 2 +420 0 349 00:00 24:00 1234567
0605% 3 -#31# 0 59 00:00 24:00 1234567
608% 1 #31#+420 0 0 00:00 24:00 1234567
% 1 0 9 00:00 24:00 1234567
% 100 0 G10 00:00 24:00 1234567
% 101 0 G1 00:00 12:00 1234567
% 101 0 G12 12:00 24:00 1234567
Black & White Tables
Set the rules to disable routing for calls that failed to meet the set parameters before,
such as unconnected calls, short calls, rejected calls, and so on.
To Next Page
Loading...
