Records of Events and Calls
Record Type in Log File
POWER – System power on, power off or reset
INIT – Initialisation of EEPROM (configuration) or Flash (upgrade)
HW-ERR – HW error of plugged-in board
SYSERR – System error (memory error, etc.)
BRDIN – Board plugged-in
BRDOUT – Board plugged-out
BRDRES – Board reset using AT!B command
L1-ERR – PRI port layer 1 error (ISDN1)
L2-ERR – PRI port layer 2 error (ISDN2)
L3-ERR – PRI port layer 3 error (ISDN3)
G2-ERR – GSM module layer 2 error (gate2)
G3-ERR – GSM module layer 3 error (gate3)
C4-ERR – Link layer error (call4)
Record Type in Call File
I-FD – Unconnected incoming call attempt
I-OK – Connected incoming call
O-FD – Unconnected outgoing call attempt
O-OK – Connected outgoing call
To Next Page
Loading...
