3 Day Blinds ARCH - GETTING STARTED; ARCH AND HARDWARE

Your wood arch requires some assembly. In your shipment you
should have received the following items:
NOTE: The number of items shipped is dependent on the size of the arch.
• PleaseDONOTremovethe
wood shims in the grooves of
each support until installation
is complete. These shims are
necessary to keep the wood
supports from splitting during
installation
Please make sure that you have the following:
 •Steeltapemeasure
 •PowerDrilland
1
/
16
”DrillBit(forstandalonearchesonly)
 •FlatheadandPhillipsscrewdriver
 •Pencil
 •Level(foroutsidemount)
 •Awl(ortoolforstartingascrewhole)
Includedarethescrewsneededforanormalinstallation.Depending
on the mounting surface, fasteners other than the screws provided
may be required. Wall board and plaster require the use of anchors
suchasexpansionortogglebolts.Bricks,tileandstoneneed
special plugs and drill bits. Wood should always be pre-drilled to
avoid splitting.
a r c h a n d h a r d w a r e
GeTTInG STarTed
Page 1
VerticalSupports
Screws
ArchBottomRail
1
1
/
4
”DrywallScrew
#8 x
3
/
4
”
#6 x
1
/
2
”
Shim
WoodSlats