2-11
Operation Command Remarks
Configure the current port as a
static member port for a
multicast group in a VLAN
multicast static-group
group-address vlan vlan-id
Required
By default, no port is configured
as a static multicast group
member port.
In VLAN interface view
Table 2-14 Configure a static multicast group member port in VLAN interface view
Operation Command Remarks
Enter system view
system-view
—
Enter VLAN interface view
interface vlan-interface
interface-number
—
Configure specified port(s) as
static member port(s) of a
multicast group in the VLAN
multicast static-group
group-address interface
interface-list
Required
By default, no port is configured
as a static multicast group
member port.
Configuring a Static Router Port
In a network where the topology is unlikely to change, you can configure a port on the switch as a static
router port, so that the switch has a static connection to a multicast router and receives IGMP messages
from that router.
In Ethernet port view
Table 2-15 Configure a static router port in Ethernet port view
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Configure the current port as a
static router port
multicast static-router-port
vlan vlan-id
Required
By default, no static router port
is configured.
In VLAN view
Table 2-16 Configure a static router port in VLAN view
Operation Command Remarks
Enter system view
system-view
—
Enter VLAN view
vlan vlan-id
—
Configure a specified port as a
static router port
multicast static-router-port
interface-type interface-number
Required
By default, no static router port
is configured.
To Next Page
Loading...
