4-4
Transceiver type Applied environment
Whether can be an
optical transceiver
Whether can be an
electrical transceiver
XFP (10-Gigabit small
Form-factor
Pluggable)
Generally used for
10G Ethernet
interfaces
Yes No
XENPAK (10 Gigabit
EtherNet Transceiver
Package)
Generally used for
10G Ethernet
interfaces
Yes Yes
Identifying pluggable transceivers
As pluggable transceivers are of various types and from different vendors, you can perform the
following configurations to identify main parameters of the pluggable transceivers, including transceiver
type, connector type, central wavelength of the laser sent, transfer distance and vendor name or vendor
name specified.
Follow these steps to identify pluggable transceivers:
To do… Use the command… Remarks
Display main parameters of the
pluggable transceiver(s)
display transceiver interface
[ interface-type
interface-number ]
Available for all pluggable
transceivers
Display part of the electrical label
information of the anti-spoofing
transceiver(s) customized by
H3C
display transceiver manuinfo
interface [ interface-type
interface-number ]
Available for anti-spoofing
pluggable transceiver(s)
customized by H3C only
z You can use the Vendor Name field in the prompt information of the display transceiver
interface command to identify an anti-spoofing pluggable transceiver customized by H3C. If the
field is H3C, it is considered an H3C-customized pluggable transceiver.
z Electrical label information is also called permanent configuration data or archive information,
which is written to the storage device of a card during device debugging or test. The information
includes name of the card, device serial number, and vendor name or vendor name specified.
Diagnosing pluggable transceivers
The system outputs alarm information for you to diagnose and troubleshoot faults of pluggable
transceivers. Optical transceivers customized by H3C also support the digital diagnosis function, which
enables a transceiver to monitor the main parameters such as temperature, voltage, laser bias current,
TX power, and RX power. When these parameters are abnormal, you can take corresponding
measures to prevent transceiver faults.
Follow these steps to display pluggable transceiver information:
To do… Use the command… Remarks
Display the current alarm
information of the pluggable
transceiver(s)
display transceiver alarm
interface [ interface-type
interface-number ]
Available for all pluggable
transceivers
To Next Page
Loading...
