3Com 4500 - Configuring IGMP Snooping; Enabling IGMP Snooping

1-5
Configuring IGMP Snooping
Complete the following tasks to configure IGMP Snooping:
Task Remarks
Enabling IGMP Snooping Required
Configuring the Version of IGMP Snooping Optional
Configuring Timers Optional
Configuring Fast Leave Processing Optional
Configuring a Multicast Group Filter Optional
Configuring the Maximum Number of Multicast
Groups on a Port
Optional
Configuring IGMP Snooping Querier Optional
Suppressing Flooding of Unknown Multicast
Traffic in a VLAN
Optional
Configuring Static Member Port for a Multicast
Group
Optional
Configuring a Static Router Port Optional
Configuring a Port as a Simulated Group
Member
Optional
Configuring a VLAN Tag for Query Message Optional
Configuring Multicast VLAN Optional
Enabling IGMP Snooping
Follow these steps to enable IGMP Snooping:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable IGMP Snooping
globally
igmp-snooping enable
Required
By default, IGMP Snooping is
disabled globally.
Enter VLAN view
vlan vlan-id
—
Enable IGMP Snooping on the
VLAN
igmp-snooping enable
Required
By default, IGMP Snooping is
disabled on all the VLANs.