3Com 4500 - Comparison of SSH Commands with the same Functions

1-22
To do... Use the command... Remarks
Display information about all
SSH users
display ssh user-information
[ username ]
Display the current source IP
address or the IP address of
the source interface specified
for the SSH server.
display ssh-server source-ip
Display the mappings between
host public keys and SSH
servers saved on a client
display ssh server-info
Display the current source IP
address or the IP address of
the source interface specified
for the SSH Client.
display ssh2 source-ip
Comparison of SSH Commands with the Same Functions
After some SSH configuration commands are changed. For the sake of SSH configuration compatibility,
the original commands are still supported.
Table 1-2 lists both the original commands and current
commands.
Table 1-2 List of SSH configuration commands with the same functions
Operation Original commands Current commands
Display local RSA public
keys
display rsa local-key-pair public
display public-key local rsa
public
Display information about
the peer RSA public keys
display rsa peer-public-key
[ brief | name keyname ]
display public-key peer [ brief |
name pubkey-name ]
Generate RSA key pairs
rsa local-key-pair create public-key local create rsa
Destroy RSA key pairs
rsa local-key-pair destroy public-key local destroy rsa
Enter public key view
rsa peer-public-key keyname public-key peer keyname
Import RSA public key from
public key file
rsa peer-public-key keyname
import sshkey filename
public-key peer keyname
import sshkey filename
Specify publickey
authentication as the
default authentication type
for all SSH clients
ssh authentication-type default
rsa
ssh authentication-type
default publickey
Specify on the client the
host public key of the
server to be connected
ssh client { server-ip |
server-name } assign rsa-key
keyname
ssh client { server-ip |
server-name } assign publickey
keyname
Assign a public key to an
SSH user
ssh user username assign
rsa-key keyname
ssh user username assign
publickey keyname
Create an SSH user and
specify publickey
authentication as its
authentication type
ssh user username
authentication-type rsa
ssh user username
authentication-type publickey