Installing the NetWare Server Driver 41
Installing the NetWare Server Driver
This section describes how to install the NetWare driver on
a Novell server running NetWare 3.12, 4.10, or 4.11.
The 3C905C NIC does not support NetWare 3.11 or
4.0x servers.
The \NWSERVER directory on EtherDisk diskette 3 contains
the network driver file (3C90X.LAN) to be used for servers
running NetWare 3.12, 4.10, and 4.11.
Additional files (NetWare Loadable Modules [NLMs])
are required for servers running NetWare 4.10 or 4.11.
NLM files are on EtherDisk diskette 3 in the /NWSERVER
directory, or they can be obtained from Novell.
Obtaining NetWare Loadable Modules
You can obtain current NLMs for the NetWare servers listed
in Table 5 from the Novell World Wide Web site:
http://www.support.novell.com
NetWare 3.12
To install the driver in a NetWare 3.12 server:
1 Obtain the MSM31X.NLM, ETHERTSM.NLM, and
NBI31X.NLM files from Novell and copy them to the
directory on your hard drive where other NLM files
are located.
2 Copy the LAN driver file (3C90X.LAN) from
EtherDisk diskette 3 to the same directory.
Table 5 NetWare NLMs
NetWare Server NLM Name
NetWare 3.12 ETHERTSM.NLM
NBI31X.NLM
MSM31X.NLM
NetWare 4.10, 4.11 ETHERTSM.NLM
NBI.NLM
MSM.NLM
book Page 41 Monday, March 15, 1999 1:31 PM
To Next Page
Loading...
