82 CLI Reference Guide
Example
The following displays the list presented for the IP Status command:
IP>status
IP Method: Manual (DHCP disabled)
IP Address: 192.168.1.2
Subnet Mask: 255.255.0.0
Gateway: 192.168.1.1
Mgmt VID: 1
IP>
IP Ping
The IP Ping command sends ICMP echo request packets to another node in the
network.
Syntax
[IP] Ping [-n <count>] [-w <timeout>] <ipaddress>
Parameters
• count – the number of echo requests to send
• timeout – timeout in seconds to wait for each reply
• ipaddress – IP address to ping
Default Configuration
This command has no default configuration.
User Guidelines
The maximum timeout is 60 seconds.
Example
The following displays the list presented for the IP Ping command:
IP>ping -n 2 -w 10 192.168.1.1
Reply from 192.168.1.1, packet 1, time 7 ms
Reply from 192.168.1.1, packet 2, time 8 ms
IP>
IP Dhcp
The IP dhcp command enables or disables the switch from obtaining an IP address from
a dhcp server on the network
Syntax
To Next Page
Loading...
