84 CLI Reference Guide
Example
The following displays the list presented for the ftptget command:
IP>tftpget 192.168.1.1 oc801_00_00.bin
TFTP transfer starting
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
...............File transfer completed
IP>Firmware upload in success, rebooting ...
Booting ...image 1
SRAM testing: Passed
S/W Version: V1.0.0
H/W Version: R01
serial number0001
Default IP address: 169.254.17.16
**Bootup finish**....
IP tftpput
The IP tftpput command copies either the backup configuration file or the current
runtime software to a tftp server.
Syntax
[IP] tftpput [config¦ image] <tftp server ip address> <filename>
Parameters
• config – Selects the backup configuration option
• image – Selects the software image backup option
• tftp server ip address – the address of the workstation hosting the tftp server
• filename – the name of the file being saved.
Default Configuration
This command has no default configuration.
User Guidelines
The option of config or image, TFTP server IP address and the destination file name on
the server must be specified. During the firmare backup process, a series of ‘.’ symbols
To Next Page
Loading...
