14 CHAPTER 3 Configuring the Wireless 7760
Launch the 3Com Wireless Infrastructure Device Manager
(Widman) utility
1 Turn on the computer.
2 Insert the 3Com Installation CD into the CD-ROM drive.
The CD will Autorun. If it does not Autorun, you can start the setup
menu from the Windows Start menu. For example: Start > Run > d:
setup.exe.
3 In the menu click Tools and Utilities.
4 In the next screen, click the software you want to install.
5 Follow the on screen instructions to complete the installation.
Reboot the computer if prompted to do so.
Launching the 3Com Wireless Infrastructure Device Manager
To be able to configure the Access Point you need to run the
Wireless Infrastructure Device Manager. Go to Start > Programs >
3Com Wireless > Wireless Infrastructure Device Manager
If the device is working correctly the following screen should be
seen.
To Next Page
Loading...
