System Configuration
19
System
Configuration
In this section, you will learn how to configure the basic functions
of your wireless AP.
Setup Wizard The setup Wizard will walk you through the setting up of the
Office Connect Access Point
Screen 1 allows you to setup the following information:
SSID (Service Set Identifier) – This is the name of wireless
network. Input 1-32 characters
Wireless Mode – Choose the required network mode from the
drop down menu.
Channel/Frequency – Choose a frequency from the drop down
menu or select SmartSelect (recommended) to let the device
select a channel.
Click Next to continue the configuration or click clear to start
again.
To Next Page
Loading...
