System Configuration
21
Screen 3 allows you choose the security settings. Choose the
following settings from the drop down menu:
No security
WEP
WPA - Only
WPA2 - Only
WPA2 - Mixed
Click Close to close without saving, click Finish to save the settings,
Click Back to return to screen 2.
System Properties The System properties page allows you to define Device name,
location, operation modes and Load Type.
There are 5 operation modes to choose from:
Access Point mode
A Wireless LAN data transceiver that uses radio waves to connect a
wired network with wireless station.
To Next Page
Loading...
