Management
43
Firmware Auto
Update
The Wireless 7760 can auto upgrade the firmware if there is a newer
version available. If you enable the Auto Upgrade function, the
Wireless 7760 will automatically check for an updated version of
firmware in the assigned FTP server for each time interval assigned.
Remember to insert the correct FTP server IP address, username,
password and corrected route to the FTP server.
Firmware Upgrade In this section, you can see the current firmware version of your
AP. You can also manually upgrade your firmware by assigning
the correct route to your new firmware file.
Once you have chosen the upgrade file click upgrade.
Rebooting You can reboot the Wireless access point from the browser
interface.
After you click reboot the following window will be displayed.
To Next Page
Loading...
