3DPlatform.com
25
Orienting the part for success (cont.) Autodesk
®
3D Part Viewer
This online tool provides instant viewing of 2D and 3D
designs—without purchasing software.
https://360.autodesk.com/Viewer
Fine Tuning the 0.6 mm Nozzle
View and download the user guide to fine tuning the
standard 0.6 mm nozzle.
http://3dpunlimited.com/support/
Typical software Configuration
Use the typical software configuration for initial setup
with 3D printing software. Access information by
clicking the link:
http://3dpunlimited.com/support/
Software Tutorials
Please visit the following links for Slicer and Simplify 3D
software tutorials.
Note: these tutorials are not produced by 3D Platform, but are
recommended.
• Simplify 3D
https://www.youtube.com/watch?v=D968RL1Z6l4
• Slicer
https://www.youtube.com/watch?v=o1HPeovBclc
Printing Tips & Support Documentation
Link to article: Rafts, Skirts, and Brims
Link to article: Stop 3D Print Warps, Curls, and Peels
To Next Page
Loading...