3M 6000DIN Series - Accessories and Parts

(English)
4
2
3
4
4
5
6
7
8
1E
1C
1A
1G
1B
1D
1F
1
W WARNING
DIN Port Adapter
Assembly 6884
Nose cup is not approved with all congurations.
Refer to the table in 3M™ Nose Cup Assembly
6894 Replacement section in these User
Instructions. Failure to do so may adversely
affect respirator performance and result in
sickness or death.
3M™ Accessories and Parts
Number ****AAD Description
504 07065 Respirator Cleaning Wipes
601 Quantitative Fit Test
Adapter
6878 07141 Spectacle Kit
6885 07142 Lens Cover
6886 Tinted Lens Cover
7883 Neck Strap Assembly
**** AAD part numbers are catalog numbers only. NIOSH approved as PSD part numbers
CAUTION
Failure to properly dispose of spent cartridges, lters, or respirators contaminated by hazardous materials can result in environmental harm. Handling,
transportation and disposal of spent cartridges, lters, or respirators must comply with all applicable federal, state, and local laws and regulations.
3M™ CARTRIDGES
3M™ Responder Cartridge and Canister (Front-Mounted)
Number Description
450-02-11R06 CP3N Canister Alpha chloroacetophenone (CN), ortho chlorobenzylidene malonitrile (CS); and P100
FR-64 Cartridge Organic vapor, chlorine, hydrogen chloride, chlorine dioxide, sulfur dioxide, ammonia, methylamine, formaldehyde,
hydrogen uoride, hydrogen sulde, alpha chloroacetophenone (CN), ortho chlorobenzylidene malonitrile (CS) or
phosphine; and P100
NOTE: Important information is provided in the User Instructions with 3M™ Responder Cartridges and Canisters, which must be understood by
wearer before use.