3M
™
Advanced Systems Tester 900AST Series
9
Welcome Screen
This is the screen that you see when you first turn
on the 900AST tester. It shows the model name and
series, unit serial number, software version, and the
selected country. The battery symbol in the upper
right-hand corner of the display gives an indication
of the approximate battery capacity. Each bar
represents one-quarter of the full capacity.
Press
to go to the general Setup screen from the
Welcome screen.
System Setup
Use the and keys to highlight a menu item:
units, clock format, set clock, set beep, power down
timeout, or edit/create custom cables. Press the
key to select the highlighted item.
Use to return to Welcome Screen without
making changes.
To Next Page
Loading...
