11
Figure 5 - Clearance: Two Workers with Energy Absorbing Lanyards
Clearance Evaluation for One or Two
Workers Connected to the HLL with a
3M Fall Protection Energy Absorbing
Lanyard
Energy Absorbing
Lanyard
Required clearance from nearest lower level or
obstruction to HLL system height
1) Find your system span length in the rows of
Table 2.
2) Find your lanyard length in the columns of
Table 2.
3) The requied clearance is where the span
length row and lanyard length column intersect.
Working
Level
Lower Level or
Obstruction
Span Length
To Next Page
Loading...
